CDA HVN61 Uživatelský manuál stáhnout pdf (Strana 13)

How to install the hob:

Overall dimensions of the hob:

HVN61FR: Width: 580 mm Depth: 510 mm HVN81FR: Width: 770 mm Depth: 510 mm

Worktop cut-out dimensions:

HVN61FR: Width: 560 mm Depth: 490 mm HVN81FR: Width: 750 mm Depth: 490 mm

1. Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker

hood to ensure that you will have the required clearance. The cut-out (Fig.6) shows a 60mm gap from the wall to

the cut-out edge. The distance from the hob, when ﬁtted, to the back wall is 50mm.

If a splashback/worktop upstand is to be ﬁtted, take this into account when cutting the hole. The minimum distance

that the hob should be positioned away from the rear wall or splashback is 50mm.

2. Fix the foam seal underneath the appliance by following the outline of the worktop upon which the hob will rest

This ensures an airtight seal with the worktop. Do not use silicone type sealant.

Fig.4 Fig.5

400mm

600mm

Fig.6

ventilation

space

510

580/770

490

560 / 750

min 4mm

Above an oven

HVN61-81 Manual.indd 12 23/07/2010 11:23

1 2 ... 8 9 10 11 12 13 14 15 16 17

Žádné komentáře

CDA HVN61 Uživatelský manuál Strana 13