CDA HVC60SS Návod k použití stáhnout pdf (Strana 15)

This cooktop can be built into a working surface 30 to 40 mm thick and 600 mm deep.

In order to install the ceramic hob into the kitchen fixture, a hole with the dimensions

shown in figures 3.1a,b,c has to be made, keeping in consideration the following:

• NOTE: A partition should be fitted a minimum of 2 cm below the base of the hob (fig.

3.2).

650 mm

50 mm min

500 mm

450 mm

Fig. 3.3

20 mm

min

Fig. 3.2

• the ceramic hob must be kept no less than

50 mm away from any side wall;

• the rear wall must be at least 50 mm from

the ceramic hob;

• there must be a distance of at least 650 mm

between the hob and any wall cupboard or

extractor hood positioned immediately above

(see fig. 3.3);

• the coatings of the walls of the unit or appli-

ances near the cooktop must be heat resis-

tant.

• Do not install the appliance near inflam-

mable materials (eg. curtains).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Žádné komentáře

CDA HVC60SS Návod k použití Strana 15