CDA FW250 Uživatelský manuál Strana 37
- Strana / 40
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Components
37
Conduit Adapters
Allows connection of the FX and VFX Series Inverter/Chargers to FLEXware 500 and FLEXware 1000 enclosures, one FW-
ACA and DCA required per FX Series Inverter/Charger.
Model Description Includes
FW-ACA Adapter for AC end of FX Series Inverter/Charger FW-ACA and mounting hardware
DCA Adapter for DC end of FX Series Inverter/Charger DCA, bushing and mounting hardware
Mounting Brackets
FW-CCB and FW-CCB2 mounting brackets allow OutBack Power Technologies charge
controllers to be mounted on the side of FW500-DC or FW1000-DC enclosures.
FW-CCB2-T mounting bracket allows OutBack Power Technologies charge controllers
to be mounted on the top of FW500-DC or FW1000-DC enclosures. FW-MB1
mounting bracket allows mounting OutBack Power charge controllers and MATE
system displays to FLEXware 500, FLEXware 1000 and Radian enclosures.
Model Description
FW-CCB
Bracket for mounting a single FLEXmax Series Charge Controller on the side of FW500 and FW1000 enclosures
FW-CCB2
Bracket for mounting two FLEXmax Series Charge Controllers on the side of FW500 and FW1000 enclosures
FW-CCB2-T
Bracket for top mounting two FLEXmax Series Charge Controllers on the top of FW500 and FW1000 enclosures
FW-MB1
Bracket for mounting a MATE System Display on the side of FW500 and FW1000 enclosures
FW-MB2
Bracket for mounting a MATE2 System Display on the side of FW500 and FW1000 enclosures
FW-MB3
Bracket for mounting a MATE3 System Display on the side of Radian, GSLC, FW500 and FW1000 DC enclosures
FW-MB3-F
Flat-mount MATE3 Mounting Plate for installation over standard electrical boxes
FW-MB3-S
Surface-mount MATE3 Mounting Bracket
DIN Rail End Clamp
Model Description Width
FW-EC-DIN DIN rail mountable securing device for DIN rail mountable fuses or breakers.
.4” (10 mm)
DC Cable Assemblies
DC interconnect cable assemblies for wiring between inverter/chargers and breakers or DC shunts. Can also be used as battery intercon-
nects. e THW type cable assemblies are UL listed and NEC compliant with a maximum voltage rating of 1000VDC and a temperature
rating of 105°C.
Model Description Hole to hole length
FW-CABLE250-15R 250 amp 4/0 AWG (11.7 mm) DC cable 15 inches (380 mm) long with ring terminals 19” (483 mm)
on both ends and red heat shrink. For connection from 250 amp
DC breaker to inverter positive terminal.
FW-CABLE175-15R 175 amp 2/0 AWG (9.26 mm) DC cable 15 inches (380 mm) long with ring terminals 19” (483 mm)
on both ends and red heat shrink. For connection from 175 amp
DC breaker to inverter positive terminal.
FW-CABLE250-36R 250 amp 4/0 AWG (11.7 mm) DC cable 36 inches (915 mm) long with ring terminals 40” (1016 mm)
on both ends and red heat shrink. For connection from 250 amp
DC breaker to inverter positive terminal.
FW-CABLE175-36R 175 amp 2/0 AWG (9.26 mm) DC cable 36 inches (915 mm) long with ring terminals 40” (1016 mm)
on both ends and red heat shrink. For connection from 175 amp
DC breaker to inverter positive terminal.
FW-CABLE250-36W 250 amp 4/0 AWG (11.7 mm) DC cable 36 inches (915 mm) long with ring terminals 40” (1016 mm)
on both ends and white heat shrink. For connection from DC current
shunt to inverter negative terminal.
FW-CABLE175-36W 175 amp 2/0 AWG (9.26 mm) DC cable 36 inches (915 mm) long with ring terminals 40” (1016 mm)
on both ends and white heat shrink. For connection from DC current
shunt to inverter negative terminal.
• All ring lugs have 3/8” (9.53 mm) diameter hole.
FW-MB1
FW-CCB2
FW-CCB2-T
FW-MB3
FW-MB3-F
FW-MB3-S
- PRODUCT GUIDE 1
- Mobile and Marine 3
- Grid-Interactive 3
- Product Guide 4
- Radian Series GS Load Center 6
- Inverter/Charger 7
- GS Load Center 8
- Additional Accessories 8
- FX Series 10
- Extreme Series 14
- GFX International Series 15
- Charge Controller 16
- MATE Series 17
- System Monitoring Device 18
- Communications Manager 19
- * MATE Adjustable 20
- TIME * 20
- (FW-SP-ACA, FW-SP-250) 21
- Stacking 22
- Auto Transformer 23
- power ONE 24
- power TWO 25
- Knockout Location Diagram 26
- Breaker Conguration Diagram 26
- FLEXware 250 27
- Sample Bill of Materials 27
- FLEXware 500 29
- 500 Sample Bill of Materials 30
- FLEXware 1000 32
- 1000 Sample Bill of Materials 33
- Mounting Plate 34
- Components 35
- FW-BBUS FW-SBUS 36
- FW-CBUS-12 36
- FW-CBUS-8 36
- FW-SHUNT500 36
- FW1000 BUS 36
- FLEXware 38
- Specications 38
- OutBack DC DIN Mount Breakers 39
- Terminal Bus Bars 39
- Printed on recycled paper 40
Související produkty a manuály pro ne CDA FW250
ne CDA FW550 for Uživatelský manuál
(4 stránky)
(4 stránky)
ne CDA FF850 Uživatelský manuál
(12 stránky)
(12 stránky)
ne CDA FW881 Uživatelský manuál
(114 stránky)
(114 stránky)
ne CDA PC44 Uživatelský manuál
(5 stránky)
(5 stránky)
ne CDA CW897 Uživatelská příručka
(23 stránky)
(23 stránky)
ne CDA PC44 Uživatelský manuál
(10 stránky)
(10 stránky)
ne CDA EVM9 Uživatelský manuál
(46 stránky)
(46 stránky)
ne CDA FW881 Uživatelský manuál
(60 stránky)
(60 stránky)
ne CDA FW250 Instalační manuál
(4 stránky)
(4 stránky)
ne CDA FW950 for Uživatelský manuál
(32 stránky)
(32 stránky)
ne CDA PC86 Uživatelský manuál
(5 stránky)
(5 stránky)
ne CDA FW420 Uživatelský manuál
(32 stránky)
(32 stránky)
ne CDA PC44 Provozní pokyny
(104 stránky)
(104 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce