CDA ci971 Manuál

ci971 Washer Dryer 7 + 4kg 1400 Spin Manual for Installation, Use and Maintenance

10 Opening the Door The appliance is fitted with a safety device which prevents the door from being opened while a programme is in progress. Check

11 Adding Detergents and Additives Your washer Dryer’s detergent dispenser has three compartments, marked with symbols: For prewash detergent

12 desired effect with optimal detergent consumption. • On detergent packs the recommended dose is indicated for 4 levels of water hardness and for

13 Descalers • Descalers can be added to the prewash and main wash compartments as recommended by their manufacturers. • Place the detergent in th

14 Selecting and Confirming Options Options Option selection Confirm option Start / Pause The Option Selection button can be used to se

15 Easy iron: Produces items which are less creased and easy to iron. Extra rinse: Adds a rinse to the selected washing programme. Flexi Time: Re

16 Delay Timer Delay Timer Symbol Start / Pause Symbol Start / Pause Delay Timer Button 1 The “Delay Timer” button can be pressed repea

17 Starting the Wash Programme 1 To start the washing programme (after making the settings you want) press the “Start/Pause” button. 2 Once the cy

18 3 To change the washing programme, simply turn the “Programme Selector” knob to select the new programme; there is no need to set the appliance

19 Child Lock When this function is activated, changing options, temperature, spin speed and the washing/drying cycle is not possible while the cycl

2 Contents Contents ... 2 Important ...

20 Opening the Appliance in an Emergency In the event of a power failure, the door can be opened using the mechanical release, activated by means o

21 Using the Appliance for Drying General During drying cycles, the water tap must be turned on and the drain hose correctly positioned. This appli

22 been washed and spun-dried. • After drying particularly fluffy items such as new terry towels, the "Rinse" program should be carried o

23 Whether drying will be at the normal temperature (90°C) or the delicate fabrics temperature (60°C) depends on the washing programm

24 Note: • Since no washing programme has been set previously, there are no constraints on selection of the drying programme (normal or gentle). R

25 Clean Programme To keep the appliance operating at peak efficiency over time, it has a “Clean” programme for regular cleaning of the drying circu

26 Programme Listing ProgrammesSymbolTemp. (°C)Max. Spin (rpm)Max. Washing Load (kg)Max. Drying Load (kg)prewashintenseeasy ironrinse+flexi ti

27 PrewashWashConditionerLoad TypesWash Program Description Delicate coloureds with light dirtCold wash, rinses and final spin at the sel

28 Care and Maintenance Before beginning any care or maintenance, you should always disconnect the appliance from the electricity supply, and also t

29 Cleaning the Door Seal Check regularly that there are no paper clips, buttons, nails or pins in the folds of the door gasket. Cleaning the Drain

3 Important The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note

30 • Clean the pump and remove any foreign bodies. • Also check the inside “E”, making sure that the impeller turns freely; any foreign bodies stu

31 Water intake filters There are filters on the tap side of the water inlet hose and at the ends of the water inlet valves. These filters prevent i

32 Practical Information Alcoholic Beverages: The stain should first be washed with cold water, then wiped with glycerine and water and be rinsed wi

33 Mould: Mould stains should be cleaned as soon as possible. The stain should be washed with detergent, and if it does not disappear, it should be

34 Troubleshooting Error Display In event of a malfunction the machine will identify the problem by showing an error code on the display Error Co

35 Troubleshooting Table Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Ser

36 Problem Suggested Checks Appliance does not spin Anti-imbalance safety device tripped because laundry not evenly distributed in drum. If laundr

37 Installation Transit bolts and plastic spacers, located at the rear of the appliance, must be removed prior to using the appliance to prevent dam

38 Leveling 1. On appliances with adjustable rear feet, note that the rear of the appliance (as supplied) rests on skids and not on the feet. 2.

39 Connecting to the Mains Water Supply 1. Check that the water supply pressure is in the range: 0.1-1.0MPa. With higher pressures, use a pressure

4 IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product

40 • After connecting the water supply, check to ensure there are no leaks. The drain hose must be securely fastened to the outlet to prevent any

41 Important: Do not use the appliance without the fuse cover in position. How to Connect an Alternative Plug If the fitted plug is not suitable f

42 International Washing Signs

43 NOTES:-

44 1. brackets.

5 • In case of any failure, first unplug the appliance and close the water tap. • Repair on this appliance should only be undertaken by suitably q

6 and earth connections meet the local regulations and/or other applicable regulations. Important: Ensure that the transit bolts have been removed p

7 Before First Use When your washer dryer has been correctly installed, we recommend that you pre-clean the machine. This is to check that the insta

8 • We recommend loading the washer dryer to its full capacity for best water and energy efficiency. Whenever possible, we recommend that you wash

9 Control Panel Display: shows the settings (spin speed, cycle status, timer, child lock on/off, maximum recommended weight). The settings can be m