CDA CI240WH Specifikace

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

Preparing Garments for WashingPreparation• Before placing the clothes in the drum, make sure all the pockets are empty (Figure 10). Any small object

Detergents and AdditivesYour washing machine’s detergent dispenser has three compartments.• Add the detergent or additive to the detergent dispenser

Selecting the Wash ProgrammeTo select a wash programme:• Turn the programme selector dial clockwise to the desired function.• The display on the con

Selecting the Wash ProgrammeWhen you select the programme, the following information will be displayed:1. Wash programme phases: Prewash

Washing Machine ProgrammesCotton/Linendelicate coloursvery light soilCotton/Linenwhites/coloursvery light soilCotton/Linendelicate colourslight soilCo

Washing Machine Programmes0,10/590,25/300,30/590,60/591,52/592,20/641,50/640,10/450,20/450,40/451,00/450,05/550,45/550,05/250,05/00,00/050305257801101

Spin Speed Selection and Anti-CreaseYou should first select the wash programme and then select the wash options (Changing the programme cancels the pre

Time DelayTime delay selection button• A delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme.•

Starting UpStart/Pause button• To start up the washing machine you have to press the Start/Pause button (Figure 27).• The time remaining (in minu

Wash Programme Phases and Power CutsProgramme Phases• When the programme is running, the programme phase and the time remaining will appear on the

ContentsPage 1 Important informationPage 2 WarningsPage 3 Washing machine specificationsPage 4 Unpacking the washing machine and removing the trans

fig. 32fig. 3318Maintenance• After each wash, leave the door open for a while to allow the air to circulate freely inside the machine.• From time to

Cleaning the Filter• Clean the accessible filter if the drain pump is blocked by any foreign objects.• Open the kickplate cover with the aid of

Safety and Troubleshooting• If you detect any problems with your washing machine, you will probably be able to rectify them yourself by consultin

ProblemsWhy doesn’t the washing machine drain or spin-dry?• If this failure is detected, F02 will appear on the display.The reasons for the F02 indic

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HYT : 01949 862 012 F : 01949 862 00

ImportantThis appliance must only be used for the purpose for which it is intended, i.e. domestic use. Any other use could be dangerous and may lead t

Washing Machine SpecificationsAccessories71washing machineWater inlet hosespecificationsDrain hoseWork topPowercordControlpanelDetergentdispenserStainl

Unpacking the Washing Machine• Remove the base, corner protectors and top cover (Figure 1).Removing the Transit Bolts• Remove the screws holding the

Connecting to the Mains Water Supply The water supply hose is located inside the drum.• Connect the bent end of the hose to the threaded inlet of the

Levelling• To reduce the noise level from the washing machine and to prevent unnecessary movement during use, you should ensure the washing machin

Electrical informationWarning! This appliance must be earthed.The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To c

Before First Use• When your washing machine has been correctly installed, we recommend that you pre-clean the machine. This is to check that the